Stack Type Flexo Printer Printing Machine, Flexography Printing Machine, Flexografic Printing Machine, Flexo Graphic Printing Machine
Main Machine Specification:
Feature:
- Unwinding use auto tension control, use 5kg magnetic power brake.
- Rewinding use auto tension control, use 10kg magnetic power brake.
- Unwinding have EPC System and auto tension control
- The whole machine is use PLC Control system.
- Ceramic Anilox Roller 250LPI, 400 LPI, 600 LPI(or decide by customer)
- Use Taiwan brand blowing fan.
- Main motor use Taiwan brand, with Panasonic inverter. Use Taiwan brand auto counting system
- Most electrical part use Taiwan brand or Korea brand, bearing use Japan brand
- Roller all use Oxidation treatment, Static balance and dynamic balance treatment
- Use closed type doctor blade system
- Ink recycle system
Main Machine Specification:
| Model | KTFP-B81000 |
| Printing Color | 8 Color |
| Printing Width | 1000mm |
| Printing Length | 190-890mm |
| Printing Speed | 80-150m/min |
| Ceramic Anilox Cylinder | 250~600LPI JAPAN |
| Register precision | Longitude ±0.25mm Transverse ±0.25mm |
| Diameter of Unwind | 600mm |
| Diameter of Rewind | 600mm |
| Tension Range | 3-50kg |
| Tension precision | ±0.3kg |
| Paper core of unwind & rewind | Φ76mm (inner diameter) |
| Unwind and rewind material holder | Air shaft |
| Air supply | 0.6mpa |
| Press power | Mechanic control |
| Doctor blade | Double sided Enclosed type |
| Inking | Auto cyclic system |
| Inking distributing | Deceleration motor (reduction ratio 1 : 50) |
| Drying model | Electrical Drying |
| Drying power | 34KW |
| Air blower (large) | 1.1kw / 2 pcs |
| Air blower (small) | 750w / 4 pcs |
| Master motor power | 3.7(reduction ratio 1 : 5) |
| Machine power | 20KW |
| Machine size | 5.0m × 2.2m × 3.2m |
| Deviation correction system | Auto hydraulic pressure |
| Printing plate lifting system | Auto hydraulic pressure |
| Unidirectional bearing | Germany |
| Frequency conversion controller | Japan |
| Power: | 380Voltage,3phase and 50HZ |