HM-8112 is upscale construction adhesive designed for sanitary napkins and baby diapers. With great 
bonding strength, no odor, excellent heat-resistance and great spraying performance, HM-8112 is widely 
applicable to different types of substrates.

Technical Data
Composition: Thermoplastic elastomer
Appearance: Clear and colorless block solid
Toxicity: None
R&B softening point: approx. 85°C
Brookfield viscosity:125ºC--------about 7000 mPa.s 
150ºC-------about 3000 mPa.s
160ºC-------about 1950 mPa.s 
175ºC-------about 1300 mPa.s
200ºC-------about 600 mPa.s
Density: 0.97g /cm3 @ 25ºC

Application Instructions
Its adhesion performance will be affected by substrates, release paper and application environment, so 
trial run is necessary to determine whether the adhesive is suitable.
There should be no dust or oil on the surface of substrates and release paper, also the substrates and 
release paper should be treated to constant temperature and humidity before application.
Recommended application temperature:150-170ºC
Application methods: slot, spiral spray, fiber spray, Fine line, etc.

Packaging and Storage
Shelf Life: 24Months in dry and cool environment
Packaging: 20kg/carton, 1kg/cake, wrapped with fusible films

Cleaning:
The residual adhesive can be rubbed off by wooden shovel before it is totally cooled. Cooled glue 
can be cleaned with specialized detergent. Applicators can be cleaned with mineral oil at 120ºC, then purged 
with hot melt adhesive. 

Warnings:
Don't mix the product with other adhesives.
Keep the adhesive containers covered to avoid dust or contamination.
Use it with adequate ventilation to remove any hot melt fumes or vapors that are generated
Wear safety glasses, safety gloves and safety clothes when using hot melt adhesive to avoid scald.